Highway guardrail roll forming machine Supplier & Manufacturer
What is highway guardrail roll forming machine?
Highway molding machine can quickly produce guardrail plate, while a person can normal production, and the equipment accuracy is relatively high rolling very few scratches, cut off very small deformation, only need to change the wheel can produce two or three waves of guardrail plate at the same time, very good to use.
Working Flow of guardrail machine
Uncoiling – Sheet guiding – Roll forming – Length measurement – Pressure Mode – Cutting – Sheet to product support
Product Description | |
Name | High-speed guardrail plate forming equipment |
Suitable Material | Colored or galvanized steel coil, HRB60 or equivalent |
Thickness Range | ≥1.5 mm |
Coil Width Range | 500 mm. According to your actual drawing.
|
Cutting type | Automatic Hydraulic Cutting |
Main structure | 350H steel |
Roller material | Cr 12 |
Raw material | PPGI PPGI GI GL |
Length of the Sheet | You can set the length according to your need. It is controlled by PLC length accuracy: ±1mm. |
Characteristics of high speed highway guardrail machine:
- The emergence of the fence plate correction machine is like a barrier to avoid crossing the road to become an unscrupulous thing, pedestrians, protect the road, set up a barrier in the heart, and warn themselves to cross the fence in violation of road regulations.
- High-speed guardrail equipment is a lifesaver at the critical moment the guardrail board on the road does not seem to have a particularly large role, just like the belt on the car, is not the same as humble. But these humble equipment, in a critical moment will have a lifesaving role
- Collision avoidance and self-recovery ability is very strong. After hot-dip galvanizing treatment, the effect of hot-dip galvanizing products can be used normally for decades under outdoor conditions.
One is to prevent people who do not obey the traffic from crossing the road, the other is to prevent vehicles from driving randomly, and the third is also the most important to prevent vehicles from sliding out of control into the river and the sea. - The guardrail plate can distribute the collision force to the multi-span structure, so that the guardrail force is uniform, and the collision trajectory of the guardrail is smooth, which is conducive to the guidance of the car and the overall stiffness of the guardrail. It can reduce the friction between the car and the guardrail between the contact surface of the car and the beam, and correspondingly reduce the longitudinal force acting on the car, which is conducive to the correction of the trajectory of the car.
Factory Introduction
Our company specializes in the production of all kinds of cold rolling molding equipment. With 20 years of production and export experience, our export countries cover Bosnia and Herzegovina, Bolivia, the United States, Germany, Mozambique, Namibia, etc.
